SUMICO日本住鉱润滑剂株式会社
一、日本住矿SUMICO有色TFP Spray防锈剂 极薄膜防锖剂 TFP Spray COLORED 有色
二、日本住矿SUMICO Sumimold Guard速干金型防锈剂 COLORLESS 无色
三、日本住矿SUMICO PINLUB润滑剂
●特长： PTFEと有机モリブデンを配合した薄膜形成タイプの润滑スプレー。高精度で复雑な摩擦面によく付着します。
四、日本住矿SUMICO高粘度是粘性的润滑剂 1500
●特长： 特殊コンパウンドに二硫化モリブデンを配合した高粘度で粘着性の润滑剤です。高荷重、冲撃荷重に耐え、歯车の损伤と磨耗を防止します。また、歯面への付着が良く、半干燥皮膜を形成するため、拨水性があり飞散、たれ落ちが仅少です。
五、日本住矿SUMICO TFP Spray无色防锈剂 TFP Spray COLORLESS 无色
六、日本住矿SUMICO TFP Spray有色防锈剂 TFP Spray COLORED 有色
七、日本住矿SUMICO Sumimold S离型剂 编号：562036
●特长： 高粘度シリコーンオイルを主剤にした离型剤。 离型性と持続性に优れています。
八、日本住矿SUMICO TFP 100金型防锖剂 无色
九、日本住矿SUMICO HI SLIP渗透・润滑・防锈剂
●特长: 通用的渗透・润滑・防锈剂。 渗透性，与润滑性出色，防止锈。代替CRC KURE 3-36
十、日本住矿SUMICO CHAIN SPRAY二硫化钼润滑剂 CHAIN SPRAY
十一、日本住矿SUMICO二硫化钼 1100乾性被膜润滑剂
●特长： 二硫化モリブデンの乾性皮膜が手軽にできる润滑スプレーです。
十二、日本住矿SUMICO热塑性・热硬化性树脂的通用离型Sumimold F1
●特长： フッ素化合物の薄膜タイプの离型剤。寸法精度が高い成形品や金型温度が高い离型に有効です。
十三、日本住矿SUMICO干性被膜润滑剂 2250
●特长: PTFE(俗称聚四氟乙烯)作为主剂的白色的干性被覆润润滑剂。 金属，塑料，木材等表面很好地附着。
十四、日本住矿SUMICO SUMI CLEAN SPRAY 脱脂洗净剂 高压喷射强力脱脂洗净剂
●特长: 是非氯系溶剂作为主剂的高压喷射型强有力脱脂冲洗喷雾器。油脂污秽陷阱和零部件涂饰的预处理发挥威力。
十五、日本住矿SUMICO Sumimold Cleaner金型洗净剂 成形机金型洗净剂 562636
●特长: 把非氯系溶剂做为主剂的冲洗剂。 ●用途: 射出成形机模具的冲洗
十六、日本住矿SUMICO无色的特殊润滑脂SUMI Tacky spray
●特长： 有机モリブデンほか各种の添加剤を配合した无色の特殊グリーススプレー。 强い粘着力と耐热性、防锖性にも优れています。
Moly RPS Spray, Moly RPS Fluid
Sumitec 68 Spray
Hi Slip Spray, Hi Slip Fluid
Sumitacky Spray
Moly Oil Spray F 100
Sumico SKM Spray
Sumilon Powder Spray
Sumitec F Spray
Pin Lub
Sumicron Spray
Moly Powder PS, Moly Powder PA, Moly Powder PB PS PA PB
Sumimold 201
Moly
Sumimold 601
Sumico Release W2
Sumico TFP Spray (Colored & Clear), TFP Fluid (Colored & Clear)
Sumimold Guard (Colored & Clear)
Sumico OMP Spray
Sumico Rust Preventive,Dry type
OMP
Sumicut
Sumico Ultracut
Sumitap Surper (Fluid)
Sumicut Oil 15
Sumicut Oil Super 21
Sumiclean Spray
Blue Varnish Cleaner
Sumimold
Sumimold Cleaner
Sumimold F1
Sumimold F3
Sumimold FH
Sumimold P
Sumimold P2
Sumimold S
Sumimold S2
Moly LG Grease (No.3,2,1,0)
Moly LG-S Grease (No.2,1,0)
Moly FM-L Grease (No.2,1)
Moly HD Grease (No. 2,1,0)
Moly FM-HD Grease (No.1)
Sumigrease Spray
Moly Alcom Grease (No.2)
Molyspeed Grease (No.2,1,0)
Molytone Grease(No.2,1,0)
Moly PS Grease(No.2,1,0)
Molytone LM
Molytherm (No.2,1,0)
Moly Hi-temp Grease(No.1)
Hi-Moly Grease(No.2,1,00)
Moly Urea Grease(No.2,1,0)
Moly ST
Moly STS
Moly HTD-B Grease
Sumitemp Grease Spray
Sumitemp Liquid
Sumico SN-B Grease
Moly Paste S
Moly Paste S-1
Sumico SN Liquid
Sumitec 331(No.1)
Sumitec 731(No.1)
Sumitec 501(No.1)
Sumitec F931
Sumitec F932
Low Temp Grease (No.2)
Fombin RT.15, Fombin Y VAC 3
Sumiplex BN (No.2,1,0)
White Alcom Grease (No.2,1)
White Lub Spray
Sumifood Oil Spray
Sumifood Grease Spray
Molytone CK, Molytone CK-S, Molytone CK-LSumicock SL Grease
Molygear Compound 1500 and 900, Moly
| |
Product Name |
NET,
Packing Unit,
and Code |
Description |
|
Sumi Clean Spray |
420ml×20（Code ： 561936）
|
Degreasing cleaner spray.
Suitable for removing oils and fats from mechanical parts such as gears/bearings/chains, and cleaning braking systems.
Can be used for cleaning electrical contacts since carbon residue after cleaning is very small.
|
|
Parts Cleaner Jumbo |
840ml×30（Code ： 567220）
|
Large capacity degreasing cleaner spray.
Suitable for removing oils and fats from mechanical parts such as gears/bearings/chains, and cleaning braking systems.
Reverse spraying is also possible.
|
|
Sumimold Cleaner |
420ml×20（Code ： 562636）
|
Cleaner spray to remove dirt such as oils and fats or waxes which adhere to dies.
Degreasing cleaner agent that has almost no effect on binder.
|
|
Sumimold
DR |
420ml×12（Code ： 562736）
|
Cleaner spray to remove stubborn gas/tar that adheres to dies.
Reverse spraying is also possible.
|
|
Sumimold
DR2 |
420ml×12（Code ： 567336）
|
PRTR compliant products of the above "Sumimold DR".
|
フッ素系?ノンシリコーンタイプの离型剤
スミモールドSumimold F1（スプレー）
| 品番 |
容量 |
梱包単位 |
| 562236 |
420ml |
20 |
| |
Product
Name |
NET,
Packing Unit,
and Code |
Description |
|
Sumico TFP Spray
Colored |
330ml×12×4（Code ： 571233）
|
Ultra-thin film type wax rust prevention spray.
Permeable and with water replaceability, produces a uniform film on complex shapes.
Removal of rust preventives is easy because the 5um thin film offers superior anti-rust properties.
Complies with JIS K2246 NP-2 (Class-2 Solvent Dilution type Rust Prevention Oil) and JIS K2246 NP-3 (Class-3).
Suitable for rust prevention in precision components such as parts waiting for processing/assembling or injection molding press dies.
Films are available in green and clear.
※ A stock solution type is also available.
● Operating Temperature Range: -20 to +45℃
|
|
Sumico TFP Spray
Colorless |
330ml×12×4（Code ： 571333）
|
|
Sumimold Guard
Colored |
420ml×20（Code ： 562536）
|
Rust prevention spray of the above product with improved heat resistance and odor.
Designed to guard against rusting of injection molding press dies.
Since it does not enter in the clearance of knockout pins, removal of rust preventive is easy.
Complies with JIS K2246 NP-2 (Class-2 Solvent Dilution type Rust Prevention Oil) and JIS K2246 NP-3 (Class-3).
Reverse spraying is also possible.
● Operating Temperature Range: -20 to +100℃
|
|
Sumimold Guard
Colorless |
420ml×20（Code ： 562436）
|
|
Sumimold Vapora
Colored |
420ml×24（Code ： 565837）
|
Rust prevention spray of vaporization of oil/wax/no-silicone type.
While guarding against rusting of dies of injection molding presses, keeps molded products clean because no oil exudes from pin or sliders.
● Operating Temperature Range: Room Temperature to +80 ℃
|
|
Sumimold Vapora
Colorless |
420ml×24（Code ： 565836）
|
|
Sumico OMP Spray |
330ml×6×8（Code ： 511033）
|
Semi-dry film type rust prevention spray.
Suitable for rust prevention in parts used in processing/storage/transfer and long-term rust prevention of completed machine parts. Complies with JIS K2246 NP-1 (Class-1 Solvent Dilution type Rust Prevention Oil)
※A stock solution type is also available.
● Operating Temperature Range: -20 to +90 ℃
|
| |
Product
Name |
NET,
Packing Unit,
and Code |
Description |
|
Moly Paste 500 Spray |
420ml×12（Code ： 080036）
|
Paste spray with high concentration of MoS2.
Suitable for preventing seizing/drag of mechanical parts.
● Operating Temperature Range ≦ +350 ℃
|
|
Moly Paste 300 Spray |
420ml×12（Code ： 080136）
|
Paste spray containing MoS2 and graphite.
Suitable for preventing seizing/drag of mechanical parts.
●Operating Temperature Range ≦ +350 ℃
This spray can also be used for lubrication in low speed/heavy load conditions or die mold release in metal deformation processing.
●Operating Temperature Range: -20 ℃ to 180 ℃
|
|
Sumitemp Grease Spray |
420ml×12（Code ： 238136）
|
Anti-seizure spray for ultra high temperatures, containing soft fine metal particles.
Suitable for preventing seizure of matting surfaces subject to high temperatures such as sliding nozzles, centrifugal casting machines, heating furnaces, warm air furnaces, injection molding presses, etc.
● Operating Temperature Range: -10 ℃ to 800 ℃
|
|
Graphite Spray G |
220ml×20（Code ： 581332）
|
Lubrication spray containing graphite for ultra high temperatures.
Suitable for lubrication of sliding nozzles or lubrication/flaking of refractory materials.
Reserve spraying is also possible.
● Operating Temperature Range: ≦ +600 ℃
|
| |
Product
Name |
NET,
Packing Unit,
and Code |
Description |
|
Drycoat 2400 |
420ml×6×4（Code ： 134436）
|
White dry film lubricant containing PTFE.
Superior anti-adhesion. Suitable for lubricating places requiring a reduction in friction on light load lubrication parts, and non-tackiness .
● Conditions of cure: room temperature
● Operating Temperature Range: ≦ +250 ℃
|
|
Sumilon 2250 Spray |
240ml×6×8（Code ： 531038）
|
White dry film lubricant with a high concentration of PTFE.
Suitable for reducing the friction of light load lubrication parts or releasing plastic and rubber molds.
● Conditions of cure: room temperature
● Operating Temperature Range: ≦ +250 ℃
|
|
Sumilon Powder Spray |
240ml×6×8（Code ： 142064）
|
PTFE impalpable powder type white lubricant.
Suitable for reducing friction of matting surfaces used to convey heavy loads or open matting surfaces under heavy loading/extreme pressure.
● Conditions of cure: room temperature
● Operating Temperature Range: ≦ +250 ℃
|
|
Molydry 1100 Spray |
240ml×6×8（Code ： 112038）
|
Black dry film lubricant of superior load carrying capacity formulated with MoS2.
Suitable for reducing the friction of matting portions under heavy load and preventing seizing/drag of mechanical parts.
● Conditions of cure: room temperature
● Operating Temperature Range: ≦ +400 ℃
|
|
Molydry Spray 5510 |
330ml×6×8（Code ： 121664）
|
Black dry film lubricant that improves heat resistance of "Molydry 1100 Spray".
● Conditions of cure: 150 ℃ x 30 min.
(Room temperature drying is also possible)
● Operating Temperature Range: ≦+400 ℃ (Instantaneous use: ≦＋650 ℃)
|
| |
Product
Name |
NET,
Packing Unit,
and Code |
Description |
|
Sumigrease Spray |
330ml×12×4（Code ： 259664）
|
Grease spray with superior water resistance/shear stability/rust prevention characteristics. Organomolybdenum compound offers superior lubricity under heavy loads.
● Operating Temperature Range: -20 to +130 ℃
|
|
Sumiplex MP Spray |
420ml×12（Code ： 258636）
|
Grease spray that improves heat resistance of "Sumigrease Spray".
● Operating Temperature Range: -20 to +200 ℃
|
|
Sumitacky Spray |
420ml×6×4（Code ： 259436）
|
Grease spray with notably superior heat resistance/adhesive properties.
Can be used in places where trickles of water and dribbling under high temperatures is small.
Organomolybdenum compound offers superior lubricity under heavy loads.
● Operating Temperature Range: -20 to +200 ℃
|
|
Molygear 1500 Spray |
420ml×12（Code ： 259236）
|
Lubricant spray for open gears containing MoS2 for superior load carrying capacity.
Produces a strong semidry lubrication film with water repellent characteristics and superior adhesive properties.
Scattering and dripping are also minimal.
● Operating Temperature Range: 0 to +70 ℃
|
|
Moly Rope Spray |
420ml×12（Code ： 235836）
|
Lubrication spray for wire rope.
Excellent adhesive properties, minimal dribbling.
Protects ropes from rain/salt water.
Contains MoS2 for superior load carrying capacity.
● Operating Temperature Range: -10 to +150 ℃
|
|
Sumitec F5 Spray |
330ml×20（Code ： 572230）
|
Fluorinated grease spray having superior chemical stability.
Suitable for lubrication of the equipment operating in chemicals or solvents, or high temperature places (up to 250℃) such as the knockout pins of mold for injection molding machines.
● Operating Temperature Range: -20 to +250 ℃
|
| |
Product
Name |
NET,
Packing Unit,
and Code |
Description |
|
Lubrico 420 |
420ml×10×2（Code ： 531136）
|
Spray formulated with organomolybdenum compound for penetration/lubrication/rust prevention, superior in lubricity.
Suitable for screw loosening, rust prevention, light lubrication of sliding parts/pins/chains.
Reverse spraying is also possible.
● Operating Temperature Range: -10 to +70 ℃
|
|
Sumitec 68 Spray |
420ml×12×2（Code ： 360636）
|
High performance spray formulated with PTFE / organomolybdenum compound for penetration/lubrication/rust prevention.
Suitable for lubrication of running/sliding parts/chains of industrial machines/precision instruments.
Reverse spraying is also possible.
● Operating Temperature Range: -10 to +80 ℃
|
|
Sumicron Spray |
420ml×20（Code ： 522236）
|
Heat resistant/high adhesion oil spray formulated with PTFE / organomolybdenum compound.
Suitable for lubricating the knockout pins of injection molding presses, running/sliding portions of industrial machines/precision instruments.
Reverse spraying is also possible.
● Operating Temperature Range: -20 to +150 ℃
|
|
Sumico Chain Spray |
330ml×6×8（Code ： 571733）
|
Oil spray for chains formulated with MoS2.
Infiltrates clearances between pins and bushings of chains well to prevent elongation and wear of chains.
● Operating Temperature Range: -10 to +100 ℃
|
|
Molyoil F100 Spray |
480ml×6×4（Code ： 360339）
|
Heat resistant/abrasion proof oil spray formulated with organomolybdenum compound.
Suitable for lubrication of chains, matting/reels, pinions, cams, pins of various machines.
● Operating Temperature Range: -10 to +150 ℃
|
|
Hightemp Oil Spray |
420ml×12（Code ： 521336）
|
Oil spray of notably superior heat resistance.
Keeps fluidity at high temperatures for long periods.
Suitable for chain lubrication of drying furnaces at high temperatures.
Reverse spraying is also possible.
● Operating Temperature Range: ≦+250 ℃
|
| |
Product
Name |
NET,
Packing Unit,
and Code |
Description |
|
Sumifood Oil Spray
NSF No.125306
|
420ml×12×2（Code ： 521136）
|
Low viscosity white oil spray formulated with PTFE.
Effective for the parts requiring frequent lubrication or minimizing viscosity resistance.
● Operating Temperature Range: -10 to +100 ℃
|
|
White Lub Spray
NSF No.125307
|
420ml×6×4（Code ： 521036）
|
High viscosity white oil spray formulated with PTFE.
Produces a lubrication film with excellent water resistance and adhesive properties but minimal dribbling.
● Operating Temperature Range: -10 to +100 ℃
|
|
Sumifood Grease Spray
NSF No.124371
|
420ml×12×2（Code ： 521236）
|
White heat resistant/waterproof grease spray.
Can be used in a wide temperature range.
Especially suitable for open gears and hinges.
● Operating Temperature Range: -20 to +200 ℃
|
| |
Product
Name |
NET,
Packing Unit,
and Code |
Description |
|
Sumico TFP Spray
Colored |
330ml×12×4（Code ： 571233）
|
Ultra-thin film type wax rust prevention spray.
Permeable and with water replaceability, produces a uniform film on complex shapes.
Removal of rust preventives is easy because the 5um thin film offers superior anti-rust properties.
Complies with JIS K2246 NP-2 (Class-2 Solvent Dilution type Rust Prevention Oil) and JIS K2246 NP-3 (Class-3).
Suitable for rust prevention in precision components such as parts waiting for processing/assembling or injection molding press dies.
Films are available in green and clear.
※ A stock solution type is also available.
● Operating Temperature Range: -20 to +45℃
|
|
Sumico TFP Spray
Colorless |
330ml×12×4（Code ： 571333）
|
|
Sumimold Guard
Colored |
420ml×20（Code ： 562536）
|
Rust prevention spray of the above product with improved heat resistance and odor.
Designed to guard against rusting of injection molding press dies.
Since it does not enter in the clearance of knockout pins, removal of rust preventive is easy.
Complies with JIS K2246 NP-2 (Class-2 Solvent Dilution type Rust Prevention Oil) and JIS K2246 NP-3 (Class-3).
Reverse spraying is also possible.
● Operating Temperature Range: -20 to +100℃
|
|
Sumimold Guard
Colorless |
420ml×20（Code ： 562436）
|
|
Sumimold Vapora
Colored |
420ml×24（Code ： 565837）
|
Rust prevention spray of vaporization of oil/wax/no-silicone type.
While guarding against rusting of dies of injection molding presses, keeps molded products clean because no oil exudes from pin or sliders.
● Operating Temperature Range: Room Temperature to +80 ℃
|
|
Sumimold Vapora
Colorless |
420ml×24（Code ： 565836）
|
|
Sumico OMP Spray |
330ml×6×8（Code ： 511033）
|
Semi-dry film type rust prevention spray.
Suitable for rust prevention in parts used in processing/storage/transfer and long-term rust prevention of completed machine parts. Complies with JIS K2246 NP-1 (Class-1 Solvent Dilution type Rust Prevention Oil)
※A stock solution type is also available.
● Operating Temperature Range: -20 to +90 ℃
|
Silicone mold release spray
| |
Product Name |
NET,
Packing Unit,
and Code |
Description |
|
Sumimold
S |
420ml×20（Code ： 562036）
|
Silicone mold release spray.
High viscosity silicone oil base offers superior release characteristics and endurance.
Suitable for rubber, thermoplasticity/thermosetting resin mold release.
※Cannot be used for secondary fabrication of molded products.
|
|
Sumimold
S2 |
420ml×20（Code ： 562836）
|
Silicone mold release spray.
Low viscosity silicone oil is used for the base, meaning no greasiness or aggravation of the operating environment by continuous spraying.
Suitable for release of rubber, thermoplasticity/thermosetting resin molds.
Reverse spraying is possible.
※Cannot be used for secondary fabrication of molded products.
|
|
Sumimold
SR |
420ml×20（Code ： 561436）
|
Film type silicone mold release spray.
More than ample endurance with no greasiness, reduces cleaning of dies.
Suitable for CR, NBR, EPDM rubber molding.
※Cannot be used for secondary fabrication of molded products.
|
Fluorine mold release spray
| |
Product Name |
NET,
Packing Unit,
and Code |
Description |
|
Sumimold
FH |
420ml×20（Code ： 561636）
|
Fluorine compound and silicone compound type mold release spray.
Superior release characteristics and endurance. Suitable for release of high precision molds and rubber molds, thermoplasticity/thermosetting resin molds with a high mold temperature.
※Cannot be used for secondary fabrication of molded products.
|
|
Sumimold
F1 |
420ml×20（Code ： 562236）
|
Fluorine film mold release spray.
Superior release characteristics and endurance. Suitable for release of high precision molds and rubber molds, and thermoplasticity/thermosetting resin molds with a high mold temperature .
※ Can be used for secondary fabrication of molded products if volume is small.
|
|
Sumimold
FA |
420ml×20（Code ： 584636）
|
This product is "Sumimold F1" modified for use in secondary fabrication of molded products.
|
Vegetable oil mold release spray
| |
Product Name |
NET,
Packing Unit,
and Code |
Description |
|
Sumimold
P |
420ml×20（Code ： 562136）
|
Vegetable oil mold release spray (high concentration type).
Mold release agent attached to the molded product can be removed by ordinary commercial cleaner agent.
Suitable for release of secondary fabrication thermoplasticity/thermosetting resin molds.
|
|
Sumimold
P2 |
420ml×20（Code ： 561836）
|
A low concentration version of "Sumimold P".
|
|
|
|
|
|
